| EQUIPMENT
HAYWARD
POOL PRODUCTS
|
| HAYWARD
HEATERS >> IN-GROUND |
Description:
Hayward H-Series heaters feature a wealth of advances
to deliver precision water temperature control and achieve
the ideal swimming pool and spa comfort level.
The Hayward H-Series heater represents the very latest
in heating technology for swimming pools and spas. Advanced
features include digital LED control panels on all electronic
direct spark and induced draft hot surface heaters, a
rust-resistant water path with polymer header assemblies,
and a rapid-heat combustion chamber. H-Series heaters
are easy to install and maintain, thanks to its low profile,
lightweight and CPVC plumbing capabilities. In
addition, all Hayward H-Series heaters are all equipped
with a Cupro Nickel Heat Exchanger for efficient heating
and superior durability. Cupro Nickel provides improved
durability and longevity against the damaging effects
of erosion that can occur under high-flow conditions,
corrosion from occasional pool chemical imbalances,
and is ideal for salt-water based pool systems.
For
extra protection, the cupro nickel material has been
coupled with an improved flow rate by-pass control.
Together, these added technological improvements ensure
that your Hayward heater outperforms and outlasts expectations.
Featured
Highlights:
- Patented
single header "V" baffle design heat exchangers
allow for long life, fast heating and virtually no
condensation.All Hayward heat exchangers are now constructed
with highly resilient Cupro Nickel for greater durability
and longevity.
- Easy-to-read
L.E.D. Control Panel provides digital temperature
readout and diagnostics for quick identification of
components that might need service.
- Rust
resistant water path, with injection-molded polymer
header, offers improved by-pass control and extended
life by providing additional protection from the damaging
effects of erosion from high flow conditions.
|
|
|
| Hayward
- H-Series |
|
Description:
The new Hayward H-Series Low NOx Induced Draft Heaters
feature a patented Finn Plate™ heat exchanger with
Cupro Nickel for constant heat dispersement, state-of-the-art
pre-mix burners for environmentally friendly Low NOx outputs,
hot surface Silicon Nitride ignition for instant and reliable
fire up, and an advanced L.E.D. digital control panel
for simple programming of pool temperatures.
It also includes an induced draft system that constantly
moves air through the combustion chamber at a precise
flow rate. As a result, all outside weather variables
that can affect the heating performance, such as wind
conditions, are eliminated - without having to install
a high-wind stack.
Featured
Highlights:
- Induced
draft system constantly moves air through the combustion
chamber at a precise flow rate, eliminating all outside
weather variables that can affect the heating performance,
such as high wind conditions -- without a high wind
stack.
- Patented
single header "V" baffle design heat exchangers
allow for long life, fast heating and virtually no
condensation. All Hayward heat exchangers are now
constructed with highly resilient Cupro Nickel for
greater durability and longevity.
- Easy-to-read
L.E.D. Control Panel provides digital temperature
readout and diagnostics for quick identification of
components that might need service.
- Rust-resistant
water path, with injection-molded polymer header and
union lock-nut assembly, provides for extended life
and simple installation. Exclusive CPVC plumbing kit
allows for universal heater replacement and maximum
plumbing versatility.
NOTE: The Hayward IDL Series of heaters
meet the NOx Emission standards set by the California
South Coast Quality Air Management Commission for 2001
and the Texas Natural Resource Conservation Commission
Code.
|
|
|
Hayward
- H-Series
Low NOx |
|
Description:
Get the most from your swimming season with the HeatPro™
Heat Pump from Hayward. Now you can swim longer into the
evening hours, earlier in the spring and later in the
fall. The high-efficiency HeatPro heater gives you the
perfect water temperature while using less energy than
natural gas heaters. The HeatPro from Hayward is the perfect
addition to your in-ground swimming pool or spa.
In addition the HeatPro heat exchanger completely heats
all the water without allowing corrosive water to touch
metal anywhere within the heat pump. HeatPro's Armor-Coil-protected
heat exchanger allows the water passing through the system
to be heated and retuned to the pool. The ArmorCoil heat
exchanger is protected with an exclusive coating that
isolates the metal from damaging chemically treated pool
water preventing corrosion and scaling and providing a
longer life for your heat pump. Hayward
Heat Pro heat pumps offer an additional option to heat
your pool that is safe, reliable, and energy efficient.
Save money while enjoying your pool because the HeatPro
Heat Pump can save you up to 80% in operating costs,
paying for itself in one year with the operating cost
savings.
Featured
Highlights:
- ArmorCoil
Heat Exchanger has an exclusive coating that isolates
all metal from chemically treated water to prevent
corrosion and provide durability.
- Digital
L.E.D. Control Panel provides easy to read digital
temperature display and diagnostic codes for quick
identification of components that might need service.
- 2"
union plumbing connections provide for simple installation,
service and winterization.
- The
round base and compact footprint allows for easy installation
and is ideal for retrofit replacements.
Protective Vinyl coated steel screen protects the
evaporator coil from damage.
|
|
|
| Hayward
- Heat Pro |
|
| HAYWARD
HEATERS >> ABOVE GROUND |
Description:
No pilot light equals no hassle! Hayward has developed
an induced draft heater for aboveground pools and spas
that combines state-of-the-art technology with ease of
operation and superior performance. Featuring an electronic,
direct spark ignition system and an energy-efficient FireTile®
lined combustion chamber, the Hayward heater provides
100,000 BTU input, while delivering 81% thermal efficiency
and quick heating.
An integral induced draft system makes this heater completely
impervious to any high wind situations. A one-piece copper
header/heat exchanger provides for leak-free performance.
And a simple plug-in 120-volt electric cord is provided
for simple installation.
Featured
Highlights:
- 100,000
BTU input for above-ground pools and spas of all types
and sizes
- Electronic,
direct-spark ignition for total control and automatic
operation
- Revolutionary
induced draft technology ensures optimum heating and
all-weather performance, even in high wind situations
- Reduced
emissions design provides environment-friendly heating
- FireTile
combustion chamber ensures quick heating
- Jet-ported
Eugenox burners provide long life and easy maintenance
- One-piece
copper header/heat exchanger for leak-free performance
- Cool-to-the-touch
cabinet surface temperature ensures worry-free use
- Plug-in
120 volt electric cord for easy installation
|
|
|
| Hayward
- H-Series |
|
Description:
Hayward electric spa heaters contain all of the sophisticated
features and capabilities of heaters twice their size.
The electric heaters fit into compact spaces - even under
spa skirts or steps. Like all Hayward heaters, they are
easy to install and service.
Featured
Highlights:
- 304
stainless steel threaded head, safety sensor electric
heating element
- Service-ease
design gives simple access to internal controls
- Heater
on indicator light
|
|
|
| Hayward
- Spa Heater |
|
|
